896/411 Processor information
Posted: Thu Dec 28, 2017 10:02 pm
I know I'm beating a dead horse with this.. But I have 3-411's and 4-896's to play with.. To death
I'm looking for either another mpu part number, to find a datasheet or a datasheet with pinouts for this processor that I have searched day and night for. Found a few that were close, based off of vss/vdd pins, but no match. Here's the numbers off of the chip that's in all my weird boxes:
185
16246295
1H42C
YQQJJ9940D
(160 pins / Pin 1 lower left hand corner)
I've found a few posts with the same information, some claiming that it's a MC68332. 68332 is not 160 pins. 68336/68376 is 160 pins but does not match up. Some random chip I found MC68341FT is very close but not.. I'm hoping someone has some sort of information I'm missing to locate a pinout. Or a datasheet supplied
I'm hoping to give the BDM interface a try with BD32 and hopefully a DIY LPT to BDM cable. Ultimately to have one or two pcms with a built in debugger via external usb port. Routing supposed bdm lines through unused and cut C1/C2 Blue/Red did not boot at all.. No sir.
This guy looks promising
http://www.usbjtag.com/jtagnt/ecu411/index.php
I'm looking for either another mpu part number, to find a datasheet or a datasheet with pinouts for this processor that I have searched day and night for. Found a few that were close, based off of vss/vdd pins, but no match. Here's the numbers off of the chip that's in all my weird boxes:
185
16246295
1H42C
YQQJJ9940D
(160 pins / Pin 1 lower left hand corner)
I've found a few posts with the same information, some claiming that it's a MC68332. 68332 is not 160 pins. 68336/68376 is 160 pins but does not match up. Some random chip I found MC68341FT is very close but not.. I'm hoping someone has some sort of information I'm missing to locate a pinout. Or a datasheet supplied
I'm hoping to give the BDM interface a try with BD32 and hopefully a DIY LPT to BDM cable. Ultimately to have one or two pcms with a built in debugger via external usb port. Routing supposed bdm lines through unused and cut C1/C2 Blue/Red did not boot at all.. No sir.
This guy looks promising
http://www.usbjtag.com/jtagnt/ecu411/index.php