Re: VZ to VFII E38 controller programming info
Posted: Thu Mar 26, 2020 1:47 am
Can you label your wires for us?
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
yes, it would be awesome if you could label the wires in your pic. cheersMohamad. sy wrote:Thanks
I fond reset bin
I read it on xprog
It is ok
Hello! Very interesting method. I have several E38 with wrong OS flashed, they work but you can`t do anything with it. I will try your method to reflash them.VX L67 Getrag wrote:Now after going through all that & wasting a week or so(but would still like to find out how to do it for future reference) I eventually thought I have no other options so had a good E38 controller here & made some modifications to the wiring connector to make a quick swap harness, I used the good controller to set write entire & as soon as the unlocking controller message came up I swapped the harness from good to bad PCM & had just gone to programming mode & after 5 minute or so write process it was back to life although it showed weird characters for VIN & Serial but then did a write VIN section by itself seperately & all back to normal.. WOOHOO!