FS: Complete ECU tuners package Ecotec v6 SOLD
Posted: Sat Feb 03, 2018 1:12 pm
SOLD
Ecu is from a supercharged vy commodore. Modded with enhanced code and Nvram
Patch loom to run supercharged ECU on n/a wiring loom
14Point7 multi gauge(AFR, EGT, Fuel pressure etc.)
OBD11 ALDL plug from PCM Hacking
85mm Genuine GM Delphi LS6 MAF
Denso 81 pound 850cc injectors with extenders
Make an offer and all reasonable ones will be considered
getting some pics together
I also have a Ecotec v6 motor from series II vy commodore that had a full reco from sump to rockers 25 to 30k ago.
It's currently all pulled down and been cleaned and crack tested. Block has been decked and honed again ready for 30thou oversized pistons.
Does not come with pistons and may need a few other bits and pieces to get back together.
3 crown ecotec heads, best rev made.
I have it listed for only $650 if interested.
Ecu is from a supercharged vy commodore. Modded with enhanced code and Nvram
Patch loom to run supercharged ECU on n/a wiring loom
14Point7 multi gauge(AFR, EGT, Fuel pressure etc.)
OBD11 ALDL plug from PCM Hacking
85mm Genuine GM Delphi LS6 MAF
Denso 81 pound 850cc injectors with extenders
Make an offer and all reasonable ones will be considered
getting some pics together
I also have a Ecotec v6 motor from series II vy commodore that had a full reco from sump to rockers 25 to 30k ago.
It's currently all pulled down and been cleaned and crack tested. Block has been decked and honed again ready for 30thou oversized pistons.
Does not come with pistons and may need a few other bits and pieces to get back together.
3 crown ecotec heads, best rev made.
I have it listed for only $650 if interested.