Getting the gear to tune these PCMs

Programs / Tools / Scripts
Posts: 3
Joined: Sun Mar 18, 2018 7:51 am

Getting the gear to tune these PCMs

Postby Coretuned » Mon Mar 19, 2018 7:29 pm

Hi, Im just after where I can purchase some NVRAM and EEPROM Chips from to suit both the vn/vr and the later vs PCMs.
I also need the cable so I can log the data from the ALDL connector and also flash the NVRAM chips.
I need some VS EEPROM chips asap
I have a Willem Programmer and a UV eraser already.
I also need an adaptor so I can plug the memcal into the programmer without removing the chip from the holder.
Thanks.

Site Admin
User avatar
Posts: 5199
Joined: Sat Feb 28, 2009 8:34 pm

Re: Getting the gear to tune these PCMs

Postby antus » Mon Mar 19, 2018 9:21 pm

I can help with ECM NVRAM, and ALDL interfaces. Biggvl can help with PCM NVRAM and ALDL interface.
Im not sure any one does EEPROMs, but there are some sellers that have worked out OK on ebay so far. Search the forums for more information. Or I can help with a couple. Im not a shop though, have a limited collection on hand.
Adapters you can make yourself with a couple of rows of pins from jaycar or similar and some vero board.
PM me or biggvl if that sounds like what your after.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 3
Joined: Sun Mar 18, 2018 7:51 am

Re: Getting the gear to tune these PCMs

Postby Coretuned » Wed Mar 21, 2018 7:07 am

Can you pm me some more info and prices for these bits. Thanks.

Site Admin
User avatar
Posts: 5199
Joined: Sat Feb 28, 2009 8:34 pm

Re: Getting the gear to tune these PCMs

Postby antus » Wed Mar 21, 2018 10:38 pm

Click thd faq link in the top right and look at the hardware and software guide.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 3
Joined: Sun Mar 18, 2018 7:51 am

Re: Getting the gear to tune these PCMs

Postby Coretuned » Fri Mar 23, 2018 9:31 pm

I successfully read, erased and burned my first chip today. winning! :punk:

Posts: 3046
Joined: Mon Aug 02, 2010 6:35 pm

Re: Getting the gear to tune these PCMs

Postby Dylan » Sat Mar 24, 2018 7:52 am

Awesome

User avatar
Posts: 9352
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Getting the gear to tune these PCMs

Postby Holden202T » Sat Mar 24, 2018 9:15 am

Coretuned wrote:I successfully read, erased and burned my first chip today. winning! :punk:

let the tuning begin!

Return to Tools

Who is online

Users browsing this forum: No registered users and 0 guests