Page 1 of 1
Getting the gear to tune these PCMs
Posted: Mon Mar 19, 2018 7:29 pm
by Coretuned
Hi, Im just after where I can purchase some NVRAM and EEPROM Chips from to suit both the vn/vr and the later vs PCMs.
I also need the cable so I can log the data from the ALDL connector and also flash the NVRAM chips.
I need some VS EEPROM chips asap
I have a Willem Programmer and a UV eraser already.
I also need an adaptor so I can plug the memcal into the programmer without removing the chip from the holder.
Thanks.
Re: Getting the gear to tune these PCMs
Posted: Mon Mar 19, 2018 9:21 pm
by antus
I can help with ECM NVRAM, and ALDL interfaces. Biggvl can help with PCM NVRAM and ALDL interface.
Im not sure any one does EEPROMs, but there are some sellers that have worked out OK on ebay so far. Search the forums for more information. Or I can help with a couple. Im not a shop though, have a limited collection on hand.
Adapters you can make yourself with a couple of rows of pins from jaycar or similar and some vero board.
PM me or biggvl if that sounds like what your after.
Re: Getting the gear to tune these PCMs
Posted: Wed Mar 21, 2018 7:07 am
by Coretuned
Can you pm me some more info and prices for these bits. Thanks.
Re: Getting the gear to tune these PCMs
Posted: Wed Mar 21, 2018 10:38 pm
by antus
Click thd faq link in the top right and look at the hardware and software guide.
Re: Getting the gear to tune these PCMs
Posted: Fri Mar 23, 2018 9:31 pm
by Coretuned
I successfully read, erased and burned my first chip today. winning!
Re: Getting the gear to tune these PCMs
Posted: Sat Mar 24, 2018 7:52 am
by Dylan
Awesome
Re: Getting the gear to tune these PCMs
Posted: Sat Mar 24, 2018 9:15 am
by Holden202T
Coretuned wrote:I successfully read, erased and burned my first chip today. winning!
let the tuning begin!