pcmhacking.net

Hi Guys
I require a chip for a VY V6 motor that will be fitted to a boat.

The PCM code on the cover is DSZT and VATS will need to be removed and the owner wants to run it without oxygen sensors if possible due to the custom exhaust manifold going into the water

If someone in Perth can assist it will be greatly appreciated

Thanks
Graham

grahamjb wrote:Hi Guys
I require a chip for a VY V6 motor that will be fitted to a boat.

The PCM code on the cover is DSZT and VATS will need to be removed and the owner wants to run it without oxygen sensors if possible due to the custom exhaust manifold going into the water

If someone in Perth can assist it will be greatly appreciated

Thanks
Graham

What PCM is that using, one from a VY or another model ?

OZ38
The PCM is from the donor VY Commodore
Graham

That looks like your first problem (the PCM/ECU). I believe that one does not have a removalbe Memcal (chip), so you may need to find a memcal based ECU to use.

It can be flashed easily with an aldl cable if you don't need it done too quickly I can do it but postage takes 6 days each way lol

I can flash them if I can dig out my flash pcm connectors they don't get used often.

Am in Perth if either of the others are not able to assist.

Thanks for the replies guys - VL400 please check your PM

Graham

Replied to your PM, if the other users above cannot assist let me know.

I'm the other side of the country. Postage would be more than the job's worth.