willem eprom write error
Posted: Thu Apr 05, 2018 9:39 pm
Trying to write a simple vats removal for BWFU0310
original file reads correct, change vats to disabled and recheck in hex to see 1 byte of data changed all seems good.
write file to eprom and wont verify, check data written and missing bulk sections.
using PCB50B board and willem eprom to read/write, 27C512 device selected and file size is 64KB.
tuner pro rt to edit data and as I said i've checked changes in hex editor and only the one change made. Dip switches all good but for some reason will not write file correctly. What stupid thing am i missing here? I tried a 27C128 memcal and appropriate file and settings, writes 100%.
3 files added, what am I doing wrong??
original file reads correct, change vats to disabled and recheck in hex to see 1 byte of data changed all seems good.
write file to eprom and wont verify, check data written and missing bulk sections.
using PCB50B board and willem eprom to read/write, 27C512 device selected and file size is 64KB.
tuner pro rt to edit data and as I said i've checked changes in hex editor and only the one change made. Dip switches all good but for some reason will not write file correctly. What stupid thing am i missing here? I tried a 27C128 memcal and appropriate file and settings, writes 100%.
3 files added, what am I doing wrong??