Page 1 of 1
VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 7:18 pm
by Carbie
Hello everyone, i have posted a bin that i need to modify slightly but i can't work out how to read it, i have tried all xdf's (tunerpro)
Can anyone point me in the right direction please?
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 7:40 pm
by delcowizzid
its a kalmaker workshop bin can see wds30 in the bin about halfway down using a hex editor.dont think theres any w30 xdfs around
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 8:28 pm
by Carbie
thanks Delco, is that the only way it can be read?
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 8:45 pm
by delcowizzid
What are you trying to change might be able to find a few tables
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 8:48 pm
by Dylan
If you can make up a basic XDF based around the mods Delco I'll convert it to a 12P bin if that helps.
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 9:05 pm
by Holden202T
might be easier if someone has kalmaker can suck one the tables you want ?
Re: VS 5.0 bin file help needed
Posted: Sat Apr 07, 2018 9:33 pm
by Carbie
i need to delete dtc 24 but also want to check/adjust the timing map