Page 10 of 13
Re: VP V6 Calais
Posted: Thu Apr 04, 2019 6:52 pm
by Comcal76
psyolent wrote:man you have to have a level of commitment and clear head to rebuild an auto good work mate.
Thanks mate
Re: VP V6 Calais
Posted: Tue Apr 23, 2019 6:57 pm
by Comcal76
Transmission is in and it works
I took it for a test drive with a pressure gauge connected and the pressures are in spec, it shifts nice and firm through the gears I didn't drive for to long because my new temperature sender is faulty so have to wait for a new one to arrive.
Re: VP V6 Calais
Posted: Sun Apr 28, 2019 10:02 am
by Comcal76
I noticed my strut mounts were starting to bulge out so I pulled them out and they are cracked, I'm not surprised they are nolathane after all
Re: VP V6 Calais
Posted: Sun Apr 28, 2019 10:24 am
by immortality
Yep, both on my old VH did the same thing.
Re: VP V6 Calais
Posted: Sun Apr 28, 2019 10:40 am
by vlad01
yep, nolathane for ya.
So shit you need to weld their bushes into the control arms
Re: VP V6 Calais
Posted: Sat May 11, 2019 6:10 pm
by Comcal76
Spent a couple of hours driving around today testing the transmission and it shifts perfectly, transmission temperature is running between 80 to 90 degrees with some hard pulls, damn I have missed driving this car
Re: VP V6 Calais
Posted: Tue Sep 03, 2019 10:58 pm
by Comcal76
Update
Got sick of smelling the oil fumes from the catch can so I did a plumb back setup using two catch cans, i no longer have the oil smell and it's not sucking oil into the intake
Boosting at 14psi for the time being but will turn it up more soon.
Currently sourcing exhaust parts at the moment I already have a 3 inch straight through muffler and hotdog, just got to work out how much pipe and what angle bends I still need to get.
Re: VP V6 Calais
Posted: Tue Sep 03, 2019 11:48 pm
by delcowizzid
Buy 2 ubends that will do the diff from in front of the diff back 3 should do the hole car or I buy 1 ubend for over the diff and then donuts for the rest are normally the most cost effective way to buy bends
Re: VP V6 Calais
Posted: Wed Sep 04, 2019 6:28 pm
by Comcal76
The Calais is fitted with irs, got under the car today the exhaust has five 45° bends and about 1 metre of pipe so I will order it tomorrow.
Re: VP V6 Calais
Posted: Wed Sep 04, 2019 9:55 pm
by vlad01
Looking forward to seeing the results.