Prolific based USB->Serial 8192 baud support

Information and discussion of EFI hardware and specifications
User avatar
Posts: 9849
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Prolific based USB->Serial 8192 baud support

Postby Holden202T » Sun Jul 04, 2010 9:37 pm

i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!

Posts: 15
Joined: Thu Apr 29, 2010 10:48 pm
Location: Ukraine, Vinnitsa

Re: Prolific based USB->Serial 8192 baud support

Postby malser » Mon Jul 05, 2010 4:32 am

What is this device? Remove the physical devices, remove all drivers. Make sure that they are deleted (insert the device. The system should indicate that "unknown device found"). Again, physically remove the device and try to install the driver. The device must necessarily be defined as Prolific USB-to-Serial Comm Port.
Holden202 wrote:i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!

ftdi interface - is very good, but the topic for discussion Prolific

User avatar
Posts: 9849
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Prolific based USB->Serial 8192 baud support

Postby Holden202T » Mon Jul 05, 2010 8:29 am

malser wrote:ftdi interface - is very good, but the topic for discussion Prolific

that was my way of saying i am over the prolific :P

User avatar
Posts: 9849
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Prolific based USB->Serial 8192 baud support

Postby Holden202T » Thu Jul 15, 2010 10:20 am

well i got given an old spare usb -> serial adaptor, plugged it in and it detected at prolific and all the info here works for getting logging and tuning happening, so i'd say i should drop kick my old device!

Posts: 1
Joined: Tue Mar 12, 2019 12:25 am

Re: Prolific based USB->Serial 8192 baud support

Postby Piter666 » Tue Mar 12, 2019 12:28 am

Try instead of SerialMonitor this (https://www.virtual-serial-port.org/products/serialmonitor/) tool will be more convenient. In such systems, the message is usually duplicated. Monitoring from the side of the console would greatly facilitate the task.

User avatar
Posts: 267
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: Prolific based USB->Serial 8192 baud support

Postby j_ds_au » Tue Mar 12, 2019 1:05 am

Why tell us about this software that doesn't even support 8192 baud?

Joe.

Previous

Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests