Page 2 of 2
Re: Prolific based USB->Serial 8192 baud support
Posted: Sun Jul 04, 2010 9:37 pm
by Holden202T
i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!
Re: Prolific based USB->Serial 8192 baud support
Posted: Mon Jul 05, 2010 4:32 am
by malser
What is this device? Remove the physical devices, remove all drivers. Make sure that they are deleted (insert the device. The system should indicate that "unknown device found"). Again, physically remove the device and try to install the driver. The device must necessarily be defined as Prolific USB-to-Serial Comm Port.
Holden202 wrote:i'm thinking i might just shell out for a ftdi interface .... will be alot less hassles!
ftdi interface - is very good, but the topic for discussion Prolific
Re: Prolific based USB->Serial 8192 baud support
Posted: Mon Jul 05, 2010 8:29 am
by Holden202T
malser wrote:ftdi interface - is very good, but the topic for discussion Prolific
that was my way of saying i am over the prolific
Re: Prolific based USB->Serial 8192 baud support
Posted: Thu Jul 15, 2010 10:20 am
by Holden202T
well i got given an old spare usb -> serial adaptor, plugged it in and it detected at prolific and all the info here works for getting logging and tuning happening, so i'd say i should drop kick my old device!
Re: Prolific based USB->Serial 8192 baud support
Posted: Tue Mar 12, 2019 12:28 am
by Piter666
Try instead of SerialMonitor this (
https://www.virtual-serial-port.org/pro ... almonitor/) tool will be more convenient. In such systems, the message is usually duplicated. Monitoring from the side of the console would greatly facilitate the task.
Re: Prolific based USB->Serial 8192 baud support
Posted: Tue Mar 12, 2019 1:05 am
by j_ds_au
Why tell us about this software that doesn't even support 8192 baud?
Joe.