VN 808, was running, now no fuel relay voltage

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 5
Joined: Tue Sep 11, 2018 6:52 am

Re: VN 808, was running, now no fuel relay voltage

Postby Jag304 » Wed Oct 03, 2018 8:23 am

Problem solved!

I've installed a Walbro 255 and added a filter between the tank solenoid and the pump so the pump is protected. Bit of a delay as M10x1 to 5/16 barb adaptors are hard to find.

I've got a bit more electrical cleanup to do and then I'm good.

Many thanks to all

User avatar
Posts: 256
Joined: Mon May 28, 2018 5:05 pm
Location: Country Victoria on a direct road to WINTON

Re: VN 808, was running, now no fuel relay voltage

Postby oldn64 » Wed Oct 03, 2018 3:04 pm

Jag304 wrote:Problem solved!

I've installed a Walbro 255 and added a filter between the tank solenoid and the pump so the pump is protected. Bit of a delay as M10x1 to 5/16 barb adaptors are hard to find.

I've got a bit more electrical cleanup to do and then I'm good.

Many thanks to all


Great to hear Jag304,

get that lovely old girl out on the road again....

Cheers
oldn64

Previous

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 3 guests