PCM Hammer P01 and P59 flash tool v015
Re: PCM Hammer - new ls1 flash tool
These PCMs that won't allow reading... do you know if they work when installed in a car?
I hadn't made the connection with the recovery mode that my PCM got into, but yes this could be the same thing. When mine was in that state, the car was not driveable.
I hadn't made the connection with the recovery mode that my PCM got into, but yes this could be the same thing. When mine was in that state, the car was not driveable.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
-
- Posts: 18
- Joined: Sun Jan 06, 2019 8:41 am
- cars: 1988 Pontiac Fiero
Re: PCM Hammer - new ls1 flash tool
I'm waiting for some free time and I'll start to tackle this. If you would like to help with testing I'd appreciate some.MudDuck514 wrote:Hi all, haven't posted in awhile and haven't seen any one else ask, so is there any support for the 60degree V6's, such as the LA1 3400?
I ask because I recently purchased a 2004 Oldsmobile Alero GL that has one.
My understanding is that the PCM is related to the 0411 but uses a completely different part number - 12582720, 12583826, 12583827 & 89017736.
Thanks in advance for your assistance,
Mike.
Re: PCM Hammer - new ls1 flash tool
If it has the same CPU and flash chip as a 411 there's a good chance it will work, but I can't make any promises without testing it or knowing what's in those PCMs.MudDuck514 wrote:Hi all, haven't posted in awhile and haven't seen any one else ask, so is there any support for the 60degree V6's, such as the LA1 3400?
I ask because I recently purchased a 2004 Oldsmobile Alero GL that has one.
My understanding is that the PCM is related to the 0411 but uses a completely different part number - 12582720, 12583826, 12583827 & 89017736.
Thanks in advance for your assistance,
Mike.
If you're willing to spend the $40ish to get an AllPro cable, it would be interesting to try doing a full read.
If that works, Try a "quick compare" with the file that just got read out.
If that works, try a test write - this will also print out the flash chip ID, which will be very helpful if the chip is different from what's in a 411.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
-
- Posts: 74
- Joined: Sun Aug 26, 2012 9:47 pm
- cars: 2001 VU SS
- Location: Brisbane
Re: PCM Hammer - new ls1 flash tool
Just did my first write... worked perfectly with the VX diag cable on my VU ss Changed trans from auto to manual and dropped the fan cut in/out temps by 10c
-
- Posts: 26
- Joined: Mon Dec 31, 2018 9:17 pm
- cars: building a 1965 F100 with a 5.3L LS
Re: PCM Hammer - new ls1 flash tool
First ECU read on the 4896 ECUs!!
-
- Posts: 26
- Joined: Mon Dec 31, 2018 9:17 pm
- cars: building a 1965 F100 with a 5.3L LS
Re: PCM Hammer - new ls1 flash tool
Ok so after the read, I loaded up tuner pro with the 512.dll and xdf 12202088 and the values are not right on anything. The ECU is from a 2000 Truck with LM7 (4896). Is their a special XDF I need? The 0411 XDF is supposed to work from what I read.brandonwh64 wrote:First ECU read on the 4896 ECUs!!........
Here is a copy of the read properties
[12:11:33:041] VIN: 1GCEK19T1XE113519
[12:11:33:138] OS ID: 9373372
[12:11:33:233] Calibration ID: 9374401
[12:11:33:330] Hardware ID: 16220610
[12:11:33:585] Serial Number: 1DG02B438286
[12:11:33:680] Broad Cast Code: CWAF
[12:11:33:776] MEC: 0
What I also found weird was when I used quick comparison on the .bin it read then compared it to a stock 2001 LS1 0411. The bin it just read off the 4896 ECU shows bad but the 0411 shows good...
[01:41:48:061] C:\Users\XXX\Dropbox\Car\Tuning\Mytunes\Default\stock2.bin
[01:41:48:072] Validating 512k file.
[01:41:48:076] Start End Result File Actual Content
[01:41:48:080] 0 7FFFD Good 4D00 4D00 Operating system
[01:41:48:083] 8002 13FFF BAD 9E60 74B3 Engine calibration
[01:41:48:087] 14002 16DFF BAD AAAA 1216 Engine diagnostics.
[01:41:48:091] 16E02 1BDFF BAD 0000 B329 Transmission calibration
[01:41:48:096] 1BE02 1C7FF BAD 0000 0E16 Transmission diagnostics
[01:41:48:100] 1C802 1E51F BAD 004D 658F Fuel system
[01:41:48:105] 1E522 1EE9F BAD 4AFC 1DFC System
[01:41:48:110] 1EEA2 1EF9F BAD 4AFC CCFC Speedometer
[01:41:48:115] This file is corrupt. It would render your PCM unusable.
[01:46:47:575] C:\Users\XXX\Dropbox\Car\Tuning\12225074\2001 Holden Commodore Sedan Automatic LS1 5.7 Litre - 12225074.bin
[01:46:47:581] Validating 512k file.
[01:46:47:588] Start End Result File Actual Content
[01:46:47:595] 0 7FFFD Good 0BA1 0BA1 Operating system
[01:46:47:601] 8002 13FFF Good 608F 608F Engine calibration
[01:46:47:608] 14002 16DFF Good DCC3 DCC3 Engine diagnostics.
[01:46:47:616] 16E02 1BDFF Good E2C2 E2C2 Transmission calibration
[01:46:47:623] 1BE02 1C7FF Good DDB5 DDB5 Transmission diagnostics
[01:46:47:630] 1C802 1E51F Good E029 E029 Fuel system
[01:46:47:638] 1E522 1EE9F Good E2CC E2CC System
[01:46:47:646] 1EEA2 1EF9F Good 4AAE 4AAE Speedometer
[01:46:47:653] Requesting operating system ID...
[01:46:47:780] Operating system IDs do not match.
[01:46:47:787] PCM operating system ID: 9373372
[01:46:47:793] File operating system ID: 12225074
[01:46:47:801] Flashing this file could render your PCM unusable.
Re: PCM Hammer - new ls1 flash tool
What XDF was used, it must match the Operating System ID (OS ID)
Looking at the log you posted that would be: 9373372
-Enjoy
Looking at the log you posted that would be: 9373372
-Enjoy
Last edited by Gampy on Thu Jan 31, 2019 10:01 am, edited 1 time in total.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 26
- Joined: Mon Dec 31, 2018 9:17 pm
- cars: building a 1965 F100 with a 5.3L LS
Re: PCM Hammer - new ls1 flash tool
Hi grampy! I am using the Gearhead4life newest version. I was hoping that they would work on the 9373372 xdf. Does anyone know where I could get the XDFs for OS 9373372 and also why it would read the bin then fail comparing it before even edited?Gampy wrote:What XDF was used, it must match the Operating System ID (OS ID)
Looking at the log you posted that would be: 9373372
-Enjoy
: )_~
These are what I am using.
Re: PCM Hammer - new ls1 flash tool
Sorry, They will not ...
I missed the Comparison fail, if you cannot do a 'Read full Contents', then a 'Quick Comparison' against that file just created, there are issues with the read.
-Enjoy
I missed the Comparison fail, if you cannot do a 'Read full Contents', then a 'Quick Comparison' against that file just created, there are issues with the read.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 26
- Joined: Mon Dec 31, 2018 9:17 pm
- cars: building a 1965 F100 with a 5.3L LS
Re: PCM Hammer - new ls1 flash tool
Dang.. I have two of these ECUs and they are almost identical with a 0411 besides a few things and OS. Hope there is a way to flash OSGampy wrote:Sorry, They will not ...
I missed the Comparison fail, if you cannot do a 'Read full Contents', then a 'Quick Comparison' against that file just created, there are issues with the read.
-Enjoy