pcmhacking.net

Hi guys so i have done a conversion in a ford territory na and i have replaced it with a xr6 turbo 5 speed out of a ba now ive used the turbo engine harness and then the third plug out of pcm goes to the body harness and ive used this only there are 2 wires left that need to be tappedinto harness they come from the sensors this harness is for the boost tmap sensor on the cooler piping and the boost control solenoid each have one wire where do they go

one goes to B33, signal return, and the other other is a power wire. if is the one i think it is it should go to the ignition relay power out.