Page 2 of 17
Re: PCM questions regarding L67 Swap into VY
Posted: Sat Dec 01, 2018 6:28 am
by krusty
antus wrote:Yeah, if using the flash pcm you would need to load the VY NA flash enhanced bin, then tune it to support the boost (use timing etc from the memcal based SC tune).
This is what I was referring to, just to clear it up. L67 injector rate and fuel tables/ settings among other things. Assuming someone on here could supply one they've developed or load in one from the forum to get it running.
hq wagon efi 304
Posted: Sat Dec 01, 2018 3:24 pm
by seanlivingstone
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 8:38 am
by VYL67L03
Any chance you would have or able to make a VY commodore V6 Auto Patch Wiring Loom to be able to run a L67 ECU in the VY ? Kinda desperate for one as I don't think I will be able to re - pin all those wires, I have just completed an L67 top swap on my Ecotec engine.
Thanks Guys ! Much Appreciated !
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 10:17 am
by antus
The1 has said in another thread that its too much work for him. Im not sure where that is now. Most people would run the1's enhanced on the factory flash PCM. You dont have any realtime options then but the NA computer can run the L67 with that bin flashed in. See the1's enhanced thread for more information.
viewtopic.php?f=27&t=2518
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 10:55 am
by VYL67L03
Ahh very sorry about that Antus, Sweet I'll do that as I've got an ALDL cable and The1's enhanced Vy flash bin, Just one more thing I would like to ask is if the engine will still run using the standard Ecotec Injectors or will I have to get L67 Injectors ?
Thanks, Much Appreciated.
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 11:42 am
by Holden202T
it will run but the issue will be the size of the injectors, you'll run out of fuel!
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 11:48 am
by VYL67L03
Ah ok no probs Thanks for replying I'm only just trying to get it to run and idle at the moment using the VY N/A flash ecu, Are there any tables in Tunerpro that I can edit to get it idling ok ?
Thanks very much.
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 12:35 pm
by VYL67L03
Any chance I could post up my bin for you to have a look at and see if the tunes ok for the engine.
Thankyou, much appreciated
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 8:32 pm
by VYL67L03
Sorry to post here again I will delete them tomorrow just wondering if there's anyone who is able to help me out, I've tried everything I can possibly think of to get this car started it fires but shuts down immediately I have flashed in The 1's enhanced bin with vats off and it still won't fire up
Re: FS: The1's Memcal & Adaptors
Posted: Sat Jan 18, 2020 8:34 pm
by VYL67L03
I have around 60-80 psi cranking oil pressure, Have fuel pressure, the air intake is fine, Has decent spark, I've double triple checked all the wiring and is fine...it's starting to do my head in lol it just won't stay running for some reason.