pcmhacking.net

Posted: **Mon Dec 31, 2018 12:19 pm**

Hi All,

I have a question about injector tuning, first is about the calculations for correct layout..
I have seen tables like this...

: Calculated Injection.png (61.28 KiB) Viewed 2339 times

But in raw floating point & is definitely 8Bit actually looks like this...

: Raw 8Bit Injection.png (9.56 KiB) Viewed 2339 times

But there has got to be some weird calculation for it as it is inversing the numbers so a simple negative multiplication calc isn't going to do the job?

Then the next question is what's the best way to get best results for fuel tuning, injection manipulation or fuel pressure?

Posted: **Mon Dec 31, 2018 3:29 pm**

Every 1 difference makes 0.2 difference to the actual value.so i'd say something like divide by 5 and apply offset.

Posted: **Mon Dec 31, 2018 4:28 pm**

(X-150)/5
Or rearrange to X/5 -30

Posted: **Tue Jan 01, 2019 7:43 pm**

WOW I don't know how you guy's see that stuff!!!

Thank you so much & REALLY appreciate it!

Now I just need to get a grasp on how is best to tune the fuel side of turbo diesels!

pcmhacking.net

Turbo Diesel Injector Tuning

Turbo Diesel Injector Tuning

Re: Turbo Diesel Injector Tuning

Re: Turbo Diesel Injector Tuning

Re: Turbo Diesel Injector Tuning