Page 1 of 1
DHC11
Posted: Mon Apr 29, 2019 10:48 pm
by rich6
Anyone know where I can download this? Thanks.
Re: DHC11
Posted: Mon Apr 29, 2019 10:52 pm
by Ken
Re: DHC11
Posted: Tue Apr 30, 2019 8:21 am
by rich6
Ken wrote:From here.
DHC11.zip
You're a star Ken!
Thanks!
Just out of interest, I am looking at firmware in a magneti marelli 15M ECU, used in bikes and cars in the late 90's. I believe Fiats, some Fords, Ducati bikes and probably many others used it.
It runs a 68HC11 processor.
Do you know if it might be used by any Aussie cars?
Re: DHC11
Posted: Wed May 01, 2019 7:40 pm
by The1
pretty much all Holden Delco ecus used it or a variant of 68HC11, Commodores upto 2004 or so
Re: DHC11
Posted: Tue May 07, 2019 9:33 am
by antus
For others - DHC11 is written by techedge and it official site is here, but it seems the download page is missing.
http://www.techedge.com.au/utils/dhc11.htm
Im just going to drop some to Kudos to techedge here as Peter was one of the first early pioneers reversing the 808 and shared a lot of his early work regarding logging and the ALDL data stream before other options existed, let alone writing and sharing the DHC11 disassembler which worked after the other options of the time came up short.