Vn/vp Wirring diagrams
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Vn/vp Wirring diagrams
just as a side note, that wire along with the fan wire are in the grey connector on the drivers side of the engine (plugs into the loom near the battery on a commodore)
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 58
- Joined: Fri May 10, 2019 12:11 pm
- cars: Toyota Bundera, Sr Hilux, Hilux workmate.
- Location: Sydney
Re: Vn/vp Wirring diagrams
Thanks ledgends
The fuel pump is now working through the ECU
Now in reg to the EFI - is it normal that both wires on a injector have a positive ? I tested to see if it was getting a pulse and was surprised when both wires lit up the test light.
The fuel pump is now working through the ECU
Now in reg to the EFI - is it normal that both wires on a injector have a positive ? I tested to see if it was getting a pulse and was surprised when both wires lit up the test light.
Re: Vn/vp Wirring diagrams
I believe the ECU grounds out the injectors to make them deliver fuel, so 12v on both sides when not running is correct.
-
- Posts: 58
- Joined: Fri May 10, 2019 12:11 pm
- cars: Toyota Bundera, Sr Hilux, Hilux workmate.
- Location: Sydney
Re: Vn/vp Wirring diagrams
Awesome thanks