vn/vp memcal
-
- Posts: 14
- Joined: Fri Dec 02, 2016 3:16 pm
vn/vp memcal
Hi all.
Dummy question......are the vn/vp memcals the same as a vr memcal????
only ask as I have a previously done memcal for boost and wondered if it can go into my vr????
cheers
Dummy question......are the vn/vp memcals the same as a vr memcal????
only ask as I have a previously done memcal for boost and wondered if it can go into my vr????
cheers
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: vn/vp memcal
VR ones are different, the ERPOM is 4? times the capacity as the VN/VP ones.
You could stack it for the VR presuming its a manual with 082 or 305 ECU, 424 auto ECU is a no go.
You could stack it for the VR presuming its a manual with 082 or 305 ECU, 424 auto ECU is a no go.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 14
- Joined: Fri Dec 02, 2016 3:16 pm
Re: vn/vp memcal
Thanks for the fast reply vlad01...... sadly the vr is auto so guess the 2bar memcal ive got is no use damn it.
many thanks mate for your experience
Damo
many thanks mate for your experience
Damo
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: vn/vp memcal
The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.
However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 14
- Joined: Fri Dec 02, 2016 3:16 pm
Re: vn/vp memcal
vlad01 wrote:The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.
However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
You might be able to do that buddy but I,m an old dinosaur that wouldn't know where to start.....hence the dummy first question hahaha.
but appreciate your input greatly buddy
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vn/vp memcal
yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 14
- Joined: Fri Dec 02, 2016 3:16 pm
Re: vn/vp memcal
Holden202T wrote:yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.
Yeah way outta my range of skills there mate!!!
But appreciate your input.
Cheers
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vn/vp memcal
no better way to learn than to get on here and read up and have a go
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 14
- Joined: Fri Dec 02, 2016 3:16 pm
Re: vn/vp memcal
Holden202T wrote:no better way to learn than to get on here and read up and have a go
Anything computer just isnt my strong suit mate that's all....tried reading up on it all but it's real confusing to me buddy
-
- Posts: 58
- Joined: Fri May 10, 2019 12:11 pm
- cars: Toyota Bundera, Sr Hilux, Hilux workmate.
- Location: Sydney
Re: vn/vp memcal
Hi all,
Been reading up on Memcal re tunes (kinda out of my league but interesting)
I’ve been quoted $160 to have my VR memcal re tuned/programmed by what looks like a fairly reputable shop - what do you guys think? He said this “
I can dyno or road tune . If its stock then we use this tune . Its been done already on the dyno and road and tested numerous times on the dyno. Approx power is 150-155rwkw. This is the most you will get unopened.“
Or can somebody download a tune easily?
Cheeers
Been reading up on Memcal re tunes (kinda out of my league but interesting)
I’ve been quoted $160 to have my VR memcal re tuned/programmed by what looks like a fairly reputable shop - what do you guys think? He said this “
I can dyno or road tune . If its stock then we use this tune . Its been done already on the dyno and road and tested numerous times on the dyno. Approx power is 150-155rwkw. This is the most you will get unopened.“
Or can somebody download a tune easily?
Cheeers