Page 1 of 1
vn/vp memcal
Posted: Sun May 26, 2019 7:54 pm
by damo702002
Hi all.
Dummy question......are the vn/vp memcals the same as a vr memcal????
only ask as I have a previously done memcal for boost and wondered if it can go into my vr????
cheers
Re: vn/vp memcal
Posted: Sun May 26, 2019 8:01 pm
by vlad01
VR ones are different, the ERPOM is 4? times the capacity as the VN/VP ones.
You could stack it for the VR presuming its a manual with 082 or 305 ECU, 424 auto ECU is a no go.
Re: vn/vp memcal
Posted: Sun May 26, 2019 8:29 pm
by damo702002
Thanks for the fast reply vlad01...... sadly the vr is auto so guess the 2bar memcal ive got is no use damn it.
many thanks mate for your experience
Damo
Re: vn/vp memcal
Posted: Sun May 26, 2019 8:37 pm
by vlad01
The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.
However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
Re: vn/vp memcal
Posted: Sun May 26, 2019 8:41 pm
by damo702002
vlad01 wrote:The 808, 082 and 305 are essentially all the same ECU with minor updates, the VR auto is a completely different beast and not compatible.
However you could make a new tune based on 11P code for it which does have 2 and 3 bar support.
You might be able to do that buddy but I,m an old dinosaur that wouldn't know where to start.....hence the dummy first question hahaha.
but appreciate your input greatly buddy
Re: vn/vp memcal
Posted: Mon May 27, 2019 9:28 am
by Holden202T
yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.
Re: vn/vp memcal
Posted: Mon May 27, 2019 1:26 pm
by damo702002
Holden202T wrote:yeah get the ve table, spark tables and afr tables from the vn/vp tune and convert them over to the $11P code.... oh and injector rate if its been changed.
Yeah way outta my range of skills there mate!!!
But appreciate your input.
Cheers
Re: vn/vp memcal
Posted: Mon May 27, 2019 2:02 pm
by Holden202T
no better way to learn than to get on here and read up and have a go
Re: vn/vp memcal
Posted: Mon May 27, 2019 4:15 pm
by damo702002
Holden202T wrote:no better way to learn than to get on here and read up and have a go
Anything computer just isnt my strong suit mate that's all....tried reading up on it all but it's real confusing to me buddy
Re: vn/vp memcal
Posted: Sun Jul 14, 2019 9:21 pm
by Humptydumpty
Hi all,
Been reading up on Memcal re tunes (kinda out of my league but interesting)
I’ve been quoted $160 to have my VR memcal re tuned/programmed by what looks like a fairly reputable shop - what do you guys think? He said this “
I can dyno or road tune . If its stock then we use this tune . Its been done already on the dyno and road and tested numerous times on the dyno. Approx power is 150-155rwkw. This is the most you will get unopened.“
Or can somebody download a tune easily?
Cheeers