Newbie Data Logging Issues - Need Help
Posted: Mon Jun 03, 2019 10:12 pm
Hi All,
Im new to data logging and am also looking at getting into some tuning soon. Im having some issues trying to get my head around it all and was hoping someone may be able to help. Im currently logging a VR V6 Auto that has a Turbo on it. It has a 424 pcm fitted and has been tuned previously many years ago.
I have purchased the pcmhacking ALDL plug/cable and have been able to connect to the car and save a couple of logs. The issue Im having is the logs max out the MAP pressure at 104.4 KPa. Im currently running 16-17 psi boost (approx. 115KPa) and looking at the data monitors the MAP reading looks to be going off the scale (as you would expect with the current boost pressure). Reading through the $11P overview PDF I have seen that that there is only 1 bin that covers all MAP sensor types and flags are used to identify which sensor type is being used (how many bar).
I am trying to change this to reflect the 3 bar sensor I have fitted. Im using VR_$11_v1.05 ADX and $11B V106 XDF.
Im having trouble working out which BIN I need. I have tried both BLCB5067 and 11P V104\BIN\OSE_$11P V104 CAKH V6 BIN. In both cases I was unable to find the flags for [Econ] MAP sensor Type Selection. Im struggling to get my head around the BIN part, Im pretty sure I have the right XDF and ADX.
What am I missing or what have I done wrong that is stopping me from setting it up for a 3 bar MAP sensor?
Cheers
Daniel
Im new to data logging and am also looking at getting into some tuning soon. Im having some issues trying to get my head around it all and was hoping someone may be able to help. Im currently logging a VR V6 Auto that has a Turbo on it. It has a 424 pcm fitted and has been tuned previously many years ago.
I have purchased the pcmhacking ALDL plug/cable and have been able to connect to the car and save a couple of logs. The issue Im having is the logs max out the MAP pressure at 104.4 KPa. Im currently running 16-17 psi boost (approx. 115KPa) and looking at the data monitors the MAP reading looks to be going off the scale (as you would expect with the current boost pressure). Reading through the $11P overview PDF I have seen that that there is only 1 bin that covers all MAP sensor types and flags are used to identify which sensor type is being used (how many bar).
I am trying to change this to reflect the 3 bar sensor I have fitted. Im using VR_$11_v1.05 ADX and $11B V106 XDF.
Im having trouble working out which BIN I need. I have tried both BLCB5067 and 11P V104\BIN\OSE_$11P V104 CAKH V6 BIN. In both cases I was unable to find the flags for [Econ] MAP sensor Type Selection. Im struggling to get my head around the BIN part, Im pretty sure I have the right XDF and ADX.
What am I missing or what have I done wrong that is stopping me from setting it up for a 3 bar MAP sensor?
Cheers
Daniel