ls1 throttle body hole size calculator

Programs / Tools / Scripts
Posts: 560
Joined: Mon Jul 11, 2016 6:29 am

ls1 throttle body hole size calculator

Postby Wade » Thu Jun 06, 2019 5:43 pm

i found this online. may help with you cammed ls1 owners
Attachments
TB Hole Calculator.xls
(27.5 KiB) Downloaded 113 times

Site Admin
User avatar
Posts: 5854
Joined: Sat Feb 28, 2009 8:34 pm

Re: ls1 throttle body hole size calculator

Postby antus » Tue Jun 11, 2019 5:59 pm

Thanks for posting, Ive added this as as sticky so it'll remain findable.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 262
Joined: Wed Jul 01, 2009 7:18 pm
Location: Jurien Bay, W.A.

Re: ls1 throttle body hole size calculator

Postby OZ38 » Wed Jun 12, 2019 3:19 am

Can someone explain this a little more for me please.
As I have a cammed L67 with the LS1 TB and wonder if it might be helpful in some way.

Cheers

User avatar
Posts: 9849
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: ls1 throttle body hole size calculator

Postby Holden202T » Wed Jun 12, 2019 1:31 pm

i believe what this is referring to is the hole in the throttle blade of the throttle body, which will constantly bleed air into the motor.

if you chuck a big cam in the engine and it needs more throttle opening to idle (or in this case IAC open) then you can use that to calculate the hole needed to be drilled in the TB to get the IAC back to the right setting.

big cams also tend to have less vacuum and because of this are more prone to stalling and having idle issues if the air bleed is too small, add to that if you actually open the throttle stop too far it will go out of idle mode because the TPS will be reading 1-2% open.

i've also found this to be a bit of an issue in my race car where i do have a large cam and also have no PCV (air bleed) so theres less air leaks in the system than normal, so needed to put a small hole in the buttlerfly.

Posts: 262
Joined: Wed Jul 01, 2009 7:18 pm
Location: Jurien Bay, W.A.

Re: ls1 throttle body hole size calculator

Postby OZ38 » Thu Jun 13, 2019 1:22 am

Thanks for that. Makes sense now.

Posts: 262
Joined: Wed Jul 01, 2009 7:18 pm
Location: Jurien Bay, W.A.

Re: ls1 throttle body hole size calculator

Postby OZ38 » Tue Jul 16, 2019 11:25 am

I have downloaded the attachment, but can't seem to get any input on to it ? What am I doing wrong, maybe it doesn't work for a tablet.

Posts: 1246
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: ls1 throttle body hole size calculator

Postby Charlescrown » Tue Jul 16, 2019 1:49 pm

At the top of your excel screen in yellow you need to click enable editing. Should work then.

Posts: 262
Joined: Wed Jul 01, 2009 7:18 pm
Location: Jurien Bay, W.A.

Re: ls1 throttle body hole size calculator

Postby OZ38 » Tue Jul 16, 2019 2:33 pm

Ok thanks, will give it a try.

Posts: 262
Joined: Wed Jul 01, 2009 7:18 pm
Location: Jurien Bay, W.A.

Re: ls1 throttle body hole size calculator

Postby OZ38 » Mon Nov 18, 2019 2:27 am

I have a VS V6 cammed L67 with a Kalmaker Map Tune, running a LS1 TB.
Can I use TunerProRT to scan & read the IAC steps at idle ?

User avatar
Posts: 9849
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: ls1 throttle body hole size calculator

Postby Holden202T » Mon Nov 18, 2019 8:36 pm

if there is an ADF for the version of code your running then yes.

Next

Return to Tools

Who is online

Users browsing this forum: No registered users and 0 guests