vt v6 with vr ecu

General Tuning Questions And Discussions
User avatar
Posts: 435
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

vt v6 with vr ecu

Postby jenko » Tue Jun 18, 2019 4:57 pm

Quick question have mate with a vt v6 engine can he run it with a 16183082 with blcd 5077 with the vr harness with no bcm ? given I turn off vats

User avatar
Posts: 9847
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: vt v6 with vr ecu

Postby Holden202T » Tue Jun 18, 2019 5:00 pm

i would use the custom tune i made for an ecotec with $12P but yes it should work.

you need to add/change a few sensors but other than that its pretty much plug and play....

i assume this is a manual gearbox too ?

User avatar
Posts: 435
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

Re: vt v6 with vr ecu

Postby jenko » Tue Jun 18, 2019 5:21 pm

Yes manual gearbox , so I could burn 12p straight to existing eprom after uv erase which sensors need changing/adding ?
also is this suggested tune download/file.php?id=9834

User avatar
Posts: 9847
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: vt v6 with vr ecu

Postby Holden202T » Wed Jun 19, 2019 1:45 pm

yep thats the tune.

now your testing me, the CTS is different, but you could also change the tune to suit the ecotec CTS.

knock sensor needs to be the earlier type, they fit the same but its a different unit.

need to add a MAT sensor and of course MAP sensor.

User avatar
Posts: 435
Joined: Wed Jan 29, 2014 3:43 pm
Location: Pine mountain .vic

Re: vt v6 with vr ecu

Postby jenko » Wed Jun 19, 2019 4:43 pm

Cheers 202

Return to General Tuning Discussion

Who is online

Users browsing this forum: No registered users and 2 guests