Page 1 of 1
vt v6 with vr ecu
Posted: Tue Jun 18, 2019 4:57 pm
by jenko
Quick question have mate with a vt v6 engine can he run it with a 16183082 with blcd 5077 with the vr harness with no bcm ? given I turn off vats
Re: vt v6 with vr ecu
Posted: Tue Jun 18, 2019 5:00 pm
by Holden202T
i would use the custom tune i made for an ecotec with $12P but yes it should work.
you need to add/change a few sensors but other than that its pretty much plug and play....
i assume this is a manual gearbox too ?
Re: vt v6 with vr ecu
Posted: Tue Jun 18, 2019 5:21 pm
by jenko
Yes manual gearbox , so I could burn 12p straight to existing eprom after uv erase which sensors need changing/adding ?
also is this suggested tune
download/file.php?id=9834
Re: vt v6 with vr ecu
Posted: Wed Jun 19, 2019 1:45 pm
by Holden202T
yep thats the tune.
now your testing me, the CTS is different, but you could also change the tune to suit the ecotec CTS.
knock sensor needs to be the earlier type, they fit the same but its a different unit.
need to add a MAT sensor and of course MAP sensor.
Re: vt v6 with vr ecu
Posted: Wed Jun 19, 2019 4:43 pm
by jenko
Cheers 202