Advice on Real Time Tuning for VN 304 V8
Posted: Sun Jun 30, 2019 7:53 pm
Hi,
I have a LH Torana with a VP 304 V8 with T5 manual trans running the standard Delco injection ECU (VN-VP Holden Commodore wiring etc). I have installed a Edellbrock Manifold & Aeroflow Throttle Body & have been looking into tuning options.
I have been reading about modifying the Delco ECU with real time tuning as an alternative to an aftermarket ECU etc. I am also interested in leaning how to tune for future projects / upgrades in the future.
I understand I will need a ECM NVRAM, ECM 808 USB Comms Board & down load the software etc & carry out some wiring mods in the ECU to achieve etc. Could you please advise on anything else I may require & how I go about purchasing the components & fitting into the Delco ECU etc.
Any other info would be greatly appreciated, thanks
I have a LH Torana with a VP 304 V8 with T5 manual trans running the standard Delco injection ECU (VN-VP Holden Commodore wiring etc). I have installed a Edellbrock Manifold & Aeroflow Throttle Body & have been looking into tuning options.
I have been reading about modifying the Delco ECU with real time tuning as an alternative to an aftermarket ECU etc. I am also interested in leaning how to tune for future projects / upgrades in the future.
I understand I will need a ECM NVRAM, ECM 808 USB Comms Board & down load the software etc & carry out some wiring mods in the ECU to achieve etc. Could you please advise on anything else I may require & how I go about purchasing the components & fitting into the Delco ECU etc.
Any other info would be greatly appreciated, thanks