pcmhacking.net

Hi I have just rebuilt my engine in my vs v8 and converted it to manual but been trying to retune it but can't seem to get it right would anyone here be able to help me out please I'd really appreciate it

Hi mate, post up a log and matching bin. That'll make it easier to see what's needed.

Hey mate at the moment it's just a stock vs v8 auto bin but get fault codes because of the auto and when I try make changes I end up in limp mode

If someone would be able to help me out of really appreciate it

Auto and Manual use a different PCM in the VS .
here is one out of my old files , may be a kalmaker bin not sure but was a std 5l Auto converted to Manual on the auto computer

Yeah I've been trying to change the vs v8 auto bin to disable all the auto trans codes and do a few performance tweaks to suit my new setup but just been haveing troubles as I've only really use to tuning vt l67 before so probably me doing something wrong, thanks heaps mate il give your bin a try hopefully will work a bit better then mine until someone can help me out

Phantom wrote:Auto and Manual use a different PCM in the VS .
here is one out of my old files , may be a kalmaker bin not sure

MAN_AUTO.BIN

but was a std 5l Auto converted to Manual on the auto computer

Will this work and disable all trans fault codes ?? Also is vats disabled ? Thanks so much for your help I really appreciate it

Have you changed the checksum to AA ?

immortality wrote:Have you changed the checksum to AA ?

Yeah I changed checksum to AA I even just tried burning a $11p v8 bin file with auto codes switched off but still seems not to be working when I started it idled high and engine light lit so don't know what I'm doing wrong