pcmhacking.net

Is the loom & plugs to / from from a VN model V8 ok to use for my 4 cylinder project using te ' 8o8 ' ?
...ta

Yes, they're all the same

Ta.... I am realizing there is lots of info here that either I haven't read or have forgotten ... in fact probably enough to get myself going on a laptop, I am re reading all the set up / startup posts, ....if anyone wants to chip in with a logical sequence of instructions for a bunny, feel free to add your pennies worth

Start with the green FAQ button, read and re-read

The v8 loom is fine, the mods you'll need will be less injectors (obviously), and the v8 ignition module has different connectors. The 808 is the same 4 wire interface to the various modules though, so you can replace put the connectors you need on the loom for the ignition module you plan to run.