pcmhacking.net

.

It was to hectic to notice, yep full respray and yes Formula Blue (Brock Blue) my favorite Holden colour. I know it's not an original VH colour but I like it!

.

Holden was obviously right

For future reference, you'll probably laugh (i did), but instead of the grease method..... stuff some bread (white or wholegrain i don't think it matters) in there instead of grease.

Hi Guy's finally back ran into a few issues when dropping the donk in turns out had the wrong engine mounts and was unsure about the sump after it hit the K frame with the wrong mounts so replaced both now we are back on track also fitted belt kit and alternator, dizzy and radiator and thermo fan and gearbox cross member from Dellow for gearbox so now engine is in

engine mounts the sump I sat the carby on ready to get all the pipe work sorted out and have a few things to work out any ideas that fuel inlet pipe I need to get for the quadrajet? Also trying to workout what goes in the inlet manifold near the carby guessing something to do with the choke?

All the pretty work and things ... Then there is the inlet bolts. Uggg!

That's for the EGR, the choke is connected to the holes directly below the choke unit, in between the 2 shiny bolts.

Gampy wrote:All the pretty work and things ... Then there is the inlet bolts. Uggg!

Hi Mate getting new bolts Friday when I go to the bolt shop for carby bolts

Beautiful!

Ever done up your own bolts ...