My First Lathe!
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: My First Lathe!
That bellhousing is bop pattern out t350 had both chev and bop think th200r out of the gn has the same pattern
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: My First Lathe!
This is it after i did a bare minimum slap together to make sure it all works.
[youtube]https://www.youtube.com/watch?v=44SfncLikcU[/youtube]
I have a felpro full gasket kit and a few other parts for it, eventually i hope to rebuild it with some faster bits.
[youtube]https://www.youtube.com/watch?v=44SfncLikcU[/youtube]
I have a felpro full gasket kit and a few other parts for it, eventually i hope to rebuild it with some faster bits.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: My First Lathe!
Nice work
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7806
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: My First Lathe!
Those blocks have some really good go fast bits available for them. The alloy stage 2 heads would be a nice addition
Here is a reco one I found a while ago except it has the late GM 60 bellhousing pattern like VN-VY has so it should fit them. Wouldn't that be cool to have with stage 2 heads and turbo GN style front TB intake.
https://www.ebay.com.au/itm/BUICK-231-3 ... SwktFdV6Jt
Here is a reco one I found a while ago except it has the late GM 60 bellhousing pattern like VN-VY has so it should fit them. Wouldn't that be cool to have with stage 2 heads and turbo GN style front TB intake.
https://www.ebay.com.au/itm/BUICK-231-3 ... SwktFdV6Jt
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.