Hi new to this site and how to tune
Just purchased a programable delco ecm from what I have been told can be tuned by use of EFI live but located in toowoomba and having issues with finding some one to tune it .trying to tune in a crane 284 package
Any assistance or advise would be appreciated names of someone capable to tune would be great or what I need to set up a base tune otherwise
304 with programable delco
- delcowizzid
- Posts: 5523
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 304 with programable delco
Any pics of the inside and outside of the ecu so we can see what you have
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: 304 with programable delco
Will send some through
Re: 304 with programable delco
I'm also looking for a 284 crane cam tune?
Re: 304 with programable delco
DelcoWiz
Hope these can give you an idea on what system I have
Hope these can give you an idea on what system I have
- delcowizzid
- Posts: 5523
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: 304 with programable delco
Looks like a kalmaker ecu or similar made by someone else
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8472
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 304 with programable delco
Yeah that looks like kalmaker. Can see the security pal, and i think delco injection co... might say injection connection (a perth kalmaker store). It'd be worth pulling that bit of black glue off the top of the nvram so you can check the date code and see how old it is. It may be older than 10 years and gone flat. You can use with with our software, you will need an ftdi usb to serial cable to connect to it. And you may need to put a new nvram chip on it if its flat and/or wont talk to the pc. If you do that write 12p (or you could use kalmaker sp3 or sp5 if you wanted with that security chip on it) in a programmer to get it running. Tl866 any version is good for that.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396