VN-VP and VR-VS Engine Loom Connectors
Posted: Sun Sep 20, 2020 6:20 pm
Attached is PDF's containing standard pinouts for VN-VP and VR-VS engine loom connectors for wiring conversions.
The "control" connectors are in the engine bay, and the "body" connector is located near the ECM/PCM inside the vehicle.
Ignore all the B1, B2, G3 etc markings. They are for converting the loom to use the standard VT/VX 3 plug pinout arrangement (as shown in my other post here in the wiring section)
The "control" connectors are in the engine bay, and the "body" connector is located near the ECM/PCM inside the vehicle.
Ignore all the B1, B2, G3 etc markings. They are for converting the loom to use the standard VT/VX 3 plug pinout arrangement (as shown in my other post here in the wiring section)