pcmhacking.net

Try this please ... You only need to write the calibration segment.

I started with your

2004 Escalade 5.3AutoStock.bin

posted above, then swapped in the Fuel Segment from

HDW 12583660 - SERV 12586242 - OS 12587603 - 2004TahoeDBW5.3FlexFuel.bin

then copied the tables over from your

STOCK_2003 Tahoe 12579405.bin

posted in the VATS delete thread.

Please let us know ...

-Enjoy

I will try and let you know.
How did you swapped fuel segment and copied the tables from 2003

Thank you!

I used Universal Patcher to swap the segment and a private tool to copy the tables ...
However, I suspect Universal Patcher would also do the table copy, I just have not tried to figure out how to do so, YET!

-Enjoy

Thank you
Cant find tutorial for universal patcher.

There is no tutorial for it's use ... Just open a bin (a copy of one) and explore it, figure it out and/or ask questions.

There is several methods for table copy, one is documented in:
https://universalpatcher.net/copy-table ... -bin-file/

Another method:
- Open tuner
- Open file with tables you want to copy (source)
- Switch to list mode
- Select all tables you want to copy
- Right click one table and select "Copy selected tables to..."
- Select destination file
- Apply
- Save As...

Awesome joukoy!

Thats very awesome!

I agree, the more I explore the more I find ...

Asked in his thread if this works between differing OS's, the answer was yes!

How cool.

So. the last bin made some corrections.
When there is about 3gal in the tank, the gage shows half ))))
Empty tank (engine stalled) shows 1/4.
I think I'm gonna get back to 9405 OS and try to make changes with Universal pather.