VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
yeh if you can't reset the ecu it wont take another relink.
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
If ECM does not get reset first, then it cannot be security linked.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
You can replace a PIM if the ECM and BCM aren't touched, but this one definitely won't allow it.
I've even done it and changed the PIM code while doing so and the car starts.
I've even done it and changed the PIM code while doing so and the car starts.
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
The thread I made a while ago, I did make a post about each option for programming and the exact frames it sends, the PIM requires having the correct immo written into it and linked with the BCM otherwise it will not be happy.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
Okay, just ran through it again, particular steps involved and no resetting the ecm.
Replace PIM with reset unit, bcm/pim link with correct code, car starts.
Reset PIM that was just linked.
Link bcm/pim again and choose another code for s&g's (I went for 1111 because it's quicker to punch in for testing ecm's), car now starts with both PIM's and different codes in each.
Replace PIM with reset unit, bcm/pim link with correct code, car starts.
Reset PIM that was just linked.
Link bcm/pim again and choose another code for s&g's (I went for 1111 because it's quicker to punch in for testing ecm's), car now starts with both PIM's and different codes in each.
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
Back to uhoh ecm and pim.
Tried a reset PIM, system already reset (car still starts)
Tried linking and put in a new code, system linked and car still starts.
Tried a reset ecm with the hopefully new code, fail.
Reset the PIM.... car still starts.... so it's now broken in a good way.
Ripped the pim and it's as above.Tried a reset PIM, system already reset (car still starts)
Tried linking and put in a new code, system linked and car still starts.
Tried a reset ecm with the hopefully new code, fail.
Reset the PIM.... car still starts.... so it's now broken in a good way.
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
thats super broken haha.
What does the ECM say under its security information? Does it say its reset?
What does the ECM say under its security information? Does it say its reset?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
All normal and happily linked as far as it's concerned.Tazzi wrote:thats super broken haha.
What does the ECM say under its security information? Does it say its reset?
Last edited by jxx on Wed Mar 24, 2021 12:04 pm, edited 1 time in total.
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
So if I read this right....
The ECU you have is now linked to a PIM but will run the car with another PIM not linked to it??
Have you just solved the immobiliser off issue?!?
The ECU you have is now linked to a PIM but will run the car with another PIM not linked to it??
Have you just solved the immobiliser off issue?!?
According to chemistry, alcohol is a solution...
Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
What would happen if you disconnect the PIM and short the starter out, does the motor run?
According to chemistry, alcohol is a solution...