Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sun Feb 07, 2021 12:26 pm
I've downloaded it but haven't had a chance to use it yet, will report back when I make time.
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink
Page 2 of 23
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Mon Feb 08, 2021 5:16 pm
no drama mate, thanks!
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Mon Feb 08, 2021 9:00 pm
Ill give it a go over the weekend when I get a chance to setup an E55 on the bench 
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Thu Feb 11, 2021 8:03 am
sweet, only if you get time mate! appreciated. 
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Fri Feb 12, 2021 11:20 pm
I've got a few here. I'll hook it up tomorrow and let them run.
Nice work!
Nice work!
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sat Feb 13, 2021 3:38 pm
I just tried on 2 ECUs. It crashes after trying to connect.
Both connected on the bench, both have comms in t2w, 1 I know is timer locked and the other is not at the timer stage.
Tried on Win10x64 with MDI2, VCM2 and the Autel J box.
Tried in Win7 x32 VM with MDI2.
Anything else I can try?
Both connected on the bench, both have comms in t2w, 1 I know is timer locked and the other is not at the timer stage.
Tried on Win10x64 with MDI2, VCM2 and the Autel J box.
Tried in Win7 x32 VM with MDI2.
Anything else I can try?
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sun Feb 14, 2021 8:20 am
Thanks for testing.
Do you have the passthrough driver installed for that cable? It doesn't look like it's finding the passthrough dll driver.
You'l also likely need windows 10 with latest Runtimes installed, check here.
https://support.microsoft.com/en-us/top ... f26a218cc0
Im not sure that MDI2 supports passthrough like other cables.
Do you have the passthrough driver installed for that cable? It doesn't look like it's finding the passthrough dll driver.
You'l also likely need windows 10 with latest Runtimes installed, check here.
https://support.microsoft.com/en-us/top ... f26a218cc0
Im not sure that MDI2 supports passthrough like other cables.
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sun Feb 14, 2021 9:01 am
This is my main machine I use for programming with the mdi2 and other devices everyday so it definitely works.
I'll try another PC and get back
I'll try another PC and get back
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sun Feb 28, 2021 8:07 pm
Tried and tested with vxnano and worked great on the bench.
Couldn't get it to work in vehicle no matter what options were chosen even upto 1000ms.
Would it be possible to write a program to security link the ecu back?
Couldn't get it to work in vehicle no matter what options were chosen even upto 1000ms.
Would it be possible to write a program to security link the ecu back?
Re: VZ V6 E55 ECU Brute Force Reset Tool
Posted: Sun Feb 28, 2021 8:22 pm
That's awesome, thanks for testing!
yes it could, i could add it to this but i hadn't as 99% of people using this tool would highly likely already have a scantool to do that.
In the one vehicle i know was tested with Gareth we used the suggested timing in vehicle and had silence bus enabled and it worked in vehicle.
yes it could, i could add it to this but i hadn't as 99% of people using this tool would highly likely already have a scantool to do that.
In the one vehicle i know was tested with Gareth we used the suggested timing in vehicle and had silence bus enabled and it worked in vehicle.