Enter function to perform:9
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000
Seed/Key Unlock Successful
** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response
E55Tool VZ V6 Tool V1.4
*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from
https://github.com/BrianHumlicek Modded By IronDuke
If this Program Saved you Time/Money then Please Donate
Paypal
nigel@eyeit.org for Further Devs
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:3
Input Current PIM Pin Code:
6370
DEBUG: Current PIM Pin 36 33 37 30
** Running PIM Reset Procedure **
DEBUG: GetMessage response is 00000644037F3B7800000000
DEBUG: SendMessage Response is 7F3B7800000000
DEBUG: SendMessage Response is 7F3B7800000000
** PIM Busy **
** Waiting **
DEBUG: Response After PIM Busy is 00000644027B607800000000
** PIM Reset Successful **
Press any key to return to main menu
E55Tool VZ V6 Tool V1.4
*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from
https://github.com/BrianHumlicek Modded By IronDuke
If this Program Saved you Time/Money then Please Donate
Paypal
nigel@eyeit.org for Further Devs
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:
E55Tool VZ V6 Tool V1.4
*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from
https://github.com/BrianHumlicek Modded By IronDuke
If this Program Saved you Time/Money then Please Donate
Paypal
nigel@eyeit.org for Further Devs
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000
Seed/Key Unlock Successful
** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response
DEBUG: SendMessage Response is 00000490037F3BA336333730
** ECU/PIM Relink Procedure Failed **
Press any key to return to main menu
E55Tool VZ V6 Tool V1.4
*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from
https://github.com/BrianHumlicek Modded By IronDuke
If this Program Saved you Time/Money then Please Donate
Paypal
nigel@eyeit.org for Further Devs
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:
E55Tool VZ V6 Tool V1.4
*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from
https://github.com/BrianHumlicek Modded By IronDuke
If this Program Saved you Time/Money then Please Donate
Paypal
nigel@eyeit.org for Further Devs
*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT
Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000
Seed/Key Unlock Successful
** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response
DEBUG: SendMessage Response is 00000490037F3BA336333730
** ECU/PIM Relink Procedure Failed **
Press any key to return to main menu