pcmhacking.net

Do you have a ADX you use with the 7603 OS and your custom patch?

No, I don't use TunerPro for logging. I would recommend PCM Logger or OBDXplorer for logging.

Are you able to log with HPtuners with the different OS number?

I haven't used either of the loggers you've mentioned but i can download them and give them a shot.

Am I doing something wrong? OS was apparently written successfully, but when I try to write OS, Calibration, and boot, it says this, and won't write. Will be testing in the car tomorrow,it isn't bricked, because I can still write over it with HPT.

I haven't tested to confirm PCM Hammer V21.2 works with custom OS's. I have recommended V20 as it has worked with no issues.

That would be a question for PCM Hammer devs. I'm not sure what that error means.

Can you PM me your bin so I can test with it please.

Thank you!

-Enjoy

bubba2533 wrote:I haven't tested to confirm PCM Hammer V21.2 works with custom OS's. I have recommended V20 as it has worked with no issues.

That would be a question for PCM Hammer devs. I'm not sure what that error means.

Alright, I'll try again with v20.

Gampy wrote:Can you PM me your bin so I can test with it please.

Thank you!

-Enjoy

I'll do that shortly

bubba2533 wrote:I haven't tested to confirm PCM Hammer V21.2 works with custom OS's. I have recommended V20 as it has worked with no issues.

That would be a question for PCM Hammer devs. I'm not sure what that error means.

Sorted mate v20 works fine. So there is an issue with v21

Can I please get a valid 76030003 bin PM'd to me for testing with ??

-Enjoy

Gampy wrote:Can I please get a valid 76030003 bin PM'd to me for testing with ??

-Enjoy

Might give you a start. I've enabled lean cruise, and a few other settings, will see if it runs this afternoon