Re: LS1 Boost OS - Development
Posted: Wed Oct 11, 2023 6:10 am
personally i would suggest that the TPS for launch control is removed from the code, its not necessary. if you have clutch switch and wheel speed those variables are good enough for that function.Knackersjewels wrote:And Bubba, It'd be awesome if I could get a few tips on how the launch control is implemented, I had an issue where I enabled it at >70% tps, and it would spark cut while driving. Especially bad if downshifting, and giving a boot full, where rpm was higher than the launch rpm, the ecu would cut spark, but because rpm was 2000 above the launch limit, it would keep cutting spark even once the rpm was below launch rpm, I had to shut the car off to get it to reset to normal. Hope that makes sense.
I've since set the launch tps to 98%, but I feel it's either something I set incorrectly, or a glitch that may need addressing.