pcmhacking.net

I would absolutely love to be able to disable the "Service TPMS system" message on the cluster of my 2004 Suburban. I made the mistake of "Enabling" TPMS using my Snap-On scanner, and now I can not turn the damn thing off. SMFH

MudDuck514 wrote:As far as I know, as it is a port of PCMHammer, it has no .bin files.

Mike

IPC Hammer does include a bunch of stock bins but iirc they're only grouped by year range that they're compatible with and otherwise don't have any descriptions of which options they have enabled/disabled.

zack4200 wrote:

MudDuck514 wrote:As far as I know, as it is a port of PCMHammer, it has no .bin files.

Mike

IPC Hammer does include a bunch of stock bins but iirc they're only grouped by year range that they're compatible with and otherwise don't have any descriptions of which options they have enabled/disabled.

Well, I guess it's good they have some stock .bins.
I didn't know that.
Too bad they don't have descriptions to id whats what!

Thanks,
Mike

I have os:15190861 cal:10367965 hardware:15190826 05 cluster for 03-04. Would anyone have the calibration for this or a way to retrieve it?

04silverado6.0 wrote:I have os:15190861 cal:10367965 hardware:15190826 05 cluster for 03-04. Would anyone have the calibration for this or a way to retrieve it?

Its included with IPC Hammer, download it from github then unzip and it's in the folder 05cluster03-04truck

MudDuck514 wrote:

zack4200 wrote:

MudDuck514 wrote:As far as I know, as it is a port of PCMHammer, it has no .bin files.

Mike

IPC Hammer does include a bunch of stock bins but iirc they're only grouped by year range that they're compatible with and otherwise don't have any descriptions of which options they have enabled/disabled.

Well, I guess it's good they have some stock .bins.
I didn't know that.
Too bad they don't have descriptions to id whats what!

Thanks,
Mike

According to the first page of this thread, *every* stock file (for gmt800) is included

zack4200 wrote:

04silverado6.0 wrote:I have os:15190861 cal:10367965 hardware:15190826 05 cluster for 03-04. Would anyone have the calibration for this or a way to retrieve it?

Its included with IPC Hammer, download it from github then unzip and it's in the folder 05cluster03-04truck

The os is in the folder you stated. The cal id however is not in the folder.

darkman5001 wrote:I would absolutely love to be able to disable the "Service TPMS system" message on the cluster of my 2004 Suburban. I made the mistake of "Enabling" TPMS using my Snap-On scanner, and now I can not turn the damn thing off. SMFH

TPMS is controlled in the passenger door module on your truck. I found the commands to turn it on and off on a bench module. If you have the tools to send raw class 2 commands, I can tell you how I did it. Otherwise maybe I can just send you my bench module or something. Send me a PM if you're interested in either option.

any one have the bin files for the 99 to 02 clusters not seeing them in the zip i am mostly needing one that has trans temp enabled

Any chance of adding support for s10/blazer or any cars? Really enjoying the software so far.