First time user aldl kit

['quipt4it]

Did you tick 'Detect Hardware At Startup'

[Pete30nz]

i sure did.

['quipt4it]

I would re-read through this:
viewtopic.php?f=3&t=590
It's possible you may have missed something.

[Pete30nz]

Ok, maybe the very first few lines, mite tell me I am wrong, in that view topic link.

So all I have is the aldl plug 16pin, and the USB cable, and tunerpro RT.

What can I do with these?
Can I see realtime data with engine running, or view fault codes and reset or remove a fault code?

Cheers

[Pete30nz]

#Antus & #Gareth

['quipt4it]

So all I have is the aldl plug 16pin, and the USB cable, and tunerpro RT.

You would need to have a PCM Hacking NVRAM to connect.

[delcowizzid]

You can log with it but can't edit the tune without an nvram. I can maybe teamveiwer in and set it up and get you going if you have WiFi near the car

[Pete30nz]

So all I have is the aldl plug 16pin, and the USB cable, and tunerpro RT.

You would need to have a PCM Hacking NVRAM to connect.

Cheers for the info. I wish I'd known that upon purchase..

[Pete30nz]

You can log with it but can't edit the tune without an nvram. I can maybe teamveiwer in and set it up and get you going if you have WiFi near the car

Thanks Delcowizzid, cheers for the input.
It wouldn't be until either tomorrow evening or Tuesday evening.
That sounds like an idea?

Cheers

[The1]

Plenty of info in the FAQ button, link here to.

viewtopic.php?f=7&t=1396

Is it stock memcal your trying to connect to or enhanced mod / NVRAM?