Page 11 of 15
Re: Help needed! converting 202 to delco
Posted: Fri Sep 24, 2021 10:14 am
by Holden202T
make sure you configure the wideband 0v and 5v settings in the tune to match the widebands analog output.
Re: Help needed! converting 202 to delco
Posted: Fri Sep 24, 2021 10:34 am
by Elijah Bruce
v6bucket wrote:Are you using a manual or auto trans?
Manual
Re: Help needed! converting 202 to delco
Posted: Fri Sep 24, 2021 10:47 am
by v6bucket
I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
Re: Help needed! converting 202 to delco
Posted: Fri Sep 24, 2021 8:26 pm
by Elijah Bruce
v6bucket wrote:I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
The attachment 20210919_121059.jpg is no longer available
I took mine for a test drive today. It’s burning a bit of oil which is messing with the o2 readings a bit but otherwise ran great. Now time for tuning!
Re: Help needed! converting 202 to delco
Posted: Mon Sep 27, 2021 8:26 am
by Holden202T
good to hear your getting it sorted!
Re: Help needed! converting 202 to delco
Posted: Mon Sep 27, 2021 11:51 am
by Elijah Bruce
Holden202T wrote:good to hear your getting it sorted!
thank you! Thanks for the help everyone. Ill still be posting if i have some smaller issues.
Re: Help needed! converting 202 to delco
Posted: Sat Oct 09, 2021 3:24 pm
by Elijah Bruce
im back, just wondering how to set the transmission to 'manual' in the adx
Re: Help needed! converting 202 to delco
Posted: Sat Oct 09, 2021 4:18 pm
by vlad01
According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
Re: Help needed! converting 202 to delco
Posted: Sun Oct 10, 2021 11:14 am
by Elijah Bruce
vlad01 wrote:According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
i will have to check my grounds, but the live readout in tunerpro is registering that it is an auto when im 99% sure that B10 is grounded
Re: Help needed! converting 202 to delco
Posted: Sun Oct 10, 2021 6:21 pm
by Holden202T
if its an auto its only grounded in park and neutral, if its grounded all the time its a manual ... it wouldnt be done unless you did it.