Ve Software
Ve Software
VE ECU LINKER V0.12
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write
* Ecu write immobilizer code
*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER
*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER
*HVAC
-Single/Dual Zone programming
*SIC
-Sports/Standard mode programming
-Vin read/write
*IPC Series 1 and 2
- Config Read and write
*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters
*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box
Known OS:
92215367
92199077
12628463
12636356
12635020
This is still a work in progress.(some bugs ill work out after i get some more code locations)
If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version
*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write
*15/04/22 V0.04
-Added IPC Config programming
*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC
*12/03/23 V0.07
- Added Emulated Eeprom read and write
*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG
*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write
* Ecu write immobilizer code
*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER
*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER
*HVAC
-Single/Dual Zone programming
*SIC
-Sports/Standard mode programming
-Vin read/write
*IPC Series 1 and 2
- Config Read and write
*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters
*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box
Known OS:
92215367
92199077
12628463
12636356
12635020
This is still a work in progress.(some bugs ill work out after i get some more code locations)
If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version
*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write
*15/04/22 V0.04
-Added IPC Config programming
*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC
*12/03/23 V0.07
- Added Emulated Eeprom read and write
*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG
*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter
Last edited by mattyjf01 on Wed Feb 07, 2024 1:38 pm, edited 26 times in total.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Ve E77 E69 Code reader
Only tested on 2 E77's
and 1 E69
Please let me know Main os that dont work and if you have any bin files i can try
Thanks
Matt
and 1 E69
Please let me know Main os that dont work and if you have any bin files i can try
Thanks
Matt
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ve E77 E69 Code reader
I have a few of these ECU's lying around & if there's anything you'd like me to test I can... I haven't even opened up the software you've created with any of the E55, E69 or E77 but if you want me to test anything I can & will... I think I have around 5 good e55's & 3 or so of each of the E69 & E77's!
I've never had trouble with link & resetting though.
I've never had trouble with link & resetting though.
Re: Ve E77 E69 Code reader
If you could test on E69 and E77
And post main os and if they worked
Thanks
And post main os and if they worked
Thanks
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ve E77 E69 Code reader
Here you go sorry I lied I only have 1 e69 but it seemed to work.
I have 9x e77 & none of them came up with what e69 did so I think that may need a bit of work?
I have 9x e77 & none of them came up with what e69 did so I think that may need a bit of work?
- Attachments
-
- e69 & e77 testing.zip
- (525.84 KiB) Downloaded 375 times
Re: Ve E77 E69 Code reader
Thanks
A lot more work
Are all the ecu's linked?
A lot more work
Are all the ecu's linked?
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ve E77 E69 Code reader
Yeah all still linked, just straight out of cars at wreckers!
Re: Ve E77 E69 Code reader
Can you try the new version up the top then post the bin filesVX L67 Getrag wrote:Yeah all still linked, just straight out of cars at wreckers!
or email them to mattyjf01@hotmail.com
Thanks
Matt
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ve E77 E69 sram reader
Will do tomorrow!
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Ve E77 E69 sram reader
I only tested the first 4 again & here's the files...
- Attachments
-
- e77 take2 first 4.zip
- (208.9 KiB) Downloaded 374 times