Ve Software
Posted: Tue Jun 29, 2021 4:49 pm
VE ECU LINKER V0.12
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write
* Ecu write immobilizer code
*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER
*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER
*HVAC
-Single/Dual Zone programming
*SIC
-Sports/Standard mode programming
-Vin read/write
*IPC Series 1 and 2
- Config Read and write
*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters
*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box
Known OS:
92215367
92199077
12628463
12636356
12635020
This is still a work in progress.(some bugs ill work out after i get some more code locations)
If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version
*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write
*15/04/22 V0.04
-Added IPC Config programming
*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC
*12/03/23 V0.07
- Added Emulated Eeprom read and write
*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG
*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write
* Ecu write immobilizer code
*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER
*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER
*HVAC
-Single/Dual Zone programming
*SIC
-Sports/Standard mode programming
-Vin read/write
*IPC Series 1 and 2
- Config Read and write
*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters
*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box
Known OS:
92215367
92199077
12628463
12636356
12635020
This is still a work in progress.(some bugs ill work out after i get some more code locations)
If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version
*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write
*15/04/22 V0.04
-Added IPC Config programming
*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC
*12/03/23 V0.07
- Added Emulated Eeprom read and write
*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG
*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter