pcmhacking.net

VE ECU LINKER V0.12
- Read/Write Vin (Series 1 only)
- Read code
- Reset Ecu
- Read reset/link info
- Reads memory and saves to a file named MainOS_? Then scans the file for 4 consecutive numbers
- Skip known locations (If code location is unknown)
- Read Ecu OS and Cal numbers
*- Bench immobilizer clone
*- E38/E39 Emulated Eeprom read and write

* Ecu write immobilizer code


*CAN VIN PROGRAMMER
- Read/Write Vin (ECU, EBCM and BCM)
- Security code brute force
- E77, E69, E38, E39, E55 and SIM76
- GMLAN, CLASS2 and GM_OTHER

*SWCAN VIN PROGRAMMER
- Read/Write Vin (EHU, EHU2, IPC, IPC2, PAM, SIC)
- EHU Facia Link
- Security code brute force
- GMLAN, CLASS2 and GM_OTHER

*HVAC
-Single/Dual Zone programming

*SIC
-Sports/Standard mode programming
-Vin read/write

*IPC Series 1 and 2
- Config Read and write

*VE CLUSTER ODOMETER BIN FILE EDITOR SERIES 1 AND 2
- Read/Write odometer bin file series 1 and 2
- Reset already programmed series 2 clusters

*VE V6 Kline reader
Reads
- VIN
- Security 1/2 and Security 3/4
- Ecu Info
- Code and Immobilizer data
- Addresses that CAN can’t and saves to file
Scans address ranges and outputs to text box

Known OS:
92215367
92199077
12628463
12636356
12635020

This is still a work in progress.(some bugs ill work out after i get some more code locations)

If you have a known Main OS try unchecking the Save to file and Skip known location checkboxes
For all the rest post up the output files and ill add them to known locations
*Not available in demo version

*1/04/22 V0.02
-Added HVAC Single/Dual Zone programming
-Added SIC Sports/Standard mode programming and Vin read/write

*15/04/22 V0.04
-Added IPC Config programming

*2/08/22 V0.06
-Added Immobilizer clone
-Added Parking aid module (PAM) Vin Write
-Fixed TC programming in IPC

*12/03/23 V0.07
- Added Emulated Eeprom read and write

*2/04/23 V0.08
-Added support for fast devices eg Tactrix and Autel jbox
-Added support for slow devices eg VXDIAG

*3/02/24 V0.12
- Added TDM key tool
- TDM EEprom file to key data
- Immo file to key data
-TDM EEprom to Immo file converter

Only tested on 2 E77's
and 1 E69
Please let me know Main os that dont work and if you have any bin files i can try
Thanks
Matt

I have a few of these ECU's lying around & if there's anything you'd like me to test I can... I haven't even opened up the software you've created with any of the E55, E69 or E77 but if you want me to test anything I can & will... I think I have around 5 good e55's & 3 or so of each of the E69 & E77's!

I've never had trouble with link & resetting though.

If you could test on E69 and E77
And post main os and if they worked
Thanks

Here you go sorry I lied I only have 1 e69 but it seemed to work.

I have 9x e77 & none of them came up with what e69 did so I think that may need a bit of work?

Thanks
A lot more work
Are all the ecu's linked?

Yeah all still linked, just straight out of cars at wreckers!

VX L67 Getrag wrote:Yeah all still linked, just straight out of cars at wreckers!

Can you try the new version up the top then post the bin files
or email them to mattyjf01@hotmail.com
Thanks
Matt

Will do tomorrow!

I only tested the first 4 again & here's the files...