pcmhacking.net

The ultimate bench programming station. The station stays the same, only cords will be changed depending on device. Will do almost all protocols including ALDL, stay tuned Can use a battery input instead of the wall wart, if desired, via a jumper change.

[05:11:45:530] PCM Hammer 014
[05:11:46:295] AVT 852 Reset OK
[05:11:46:310] AVT Firmware 1.1
[05:11:46:935] This version of PCM Hammer is obsolete! Please get the latest release from https://github.com/LegacyNsfw/PcmHacks/releases

[05:14:18:018] Will save to C:\blah blah blah
[05:14:20:962] Querying operating system of current PCM.
[05:14:21:091] OSID: 12208322
[05:14:22:358] Unlock succeeded.
[05:14:22:428] Attempting switch to VPW 4x
[05:14:22:458] Module 0x10 (engine controller) has agreed to enter high-speed mode.
[05:14:25:618] Requesting permission to upload kernel.
[05:14:25:648] Upload permission granted.
[05:14:26:518] Kernel upload 48% complete.
[05:14:27:458] Kernel upload 100% complete.
[05:14:27:728] Kernel Version: 010301BB
[05:14:27:728] kernel uploaded to PCM succesfully. Requesting data...
[05:14:27:798] Flash chip: Intel 28F400B, 512kb
[05:14:27:798] Address % Done Time Remaining
[05:14:28:830] 0x000000 0% Measuring read speed...
[05:14:29:840] 0x001000 0% Measuring read speed...
[05:14:30:830] 0x002000 1% Measuring read speed...
[05:14:31:860] 0x003000 2% Measuring read speed...
[05:14:32:860] 0x004000 3% Measuring read speed...
[05:14:33:870] 0x005000 3% Measuring read speed...
[05:14:34:860] 0x006000 4% Measuring read speed...
[05:14:35:870] 0x007000 5% Measuring read speed...
[05:14:36:890] 0x008000 6% Measuring read speed...
[05:14:37:910] 0x009000 7% 02:13
[05:14:38:910] 0x00A000 7% 02:10
[05:14:39:930] 0x00B000 8% 02:08

[05:16:30:418] 0x076000 92% 00:10
[05:16:31:468] 0x077000 92% 00:09
[05:16:32:528] 0x078000 93% 00:08
[05:16:33:548] 0x079000 94% 00:07
[05:16:34:598] 0x07A000 95% 00:06
[05:16:35:638] 0x07B000 96% 00:05
[05:16:36:658] 0x07C000 96% 00:04
[05:16:37:688] 0x07D000 97% 00:03
[05:16:38:728] 0x07E000 98% 00:02
[05:16:39:756] 0x07F000 99% 00:01
[05:16:39:791] Read complete.
[05:16:39:818] All read-request messages succeeded on the first try. You have an excellent connection to the PCM.
[05:16:39:848] We're not sure how much retrying is normal for a read operation on a 512kb PCM.
[05:16:39:876] Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[05:16:39:901] Starting verification...
[05:16:39:930] Calculating CRCs from file...
[05:16:39:971] Requesting CRCs from PCM...
[05:16:40:095] Range File CRC PCM CRC Verdict Purpose
[05:16:42:494] 060000-07FFFF D5119D18 D5119D18 Same OperatingSystem
[05:16:44:914] 040000-05FFFF EDBD6276 EDBD6276 Same OperatingSystem
[05:16:47:314] 020000-03FFFF B98BA561 B98BA561 Same OperatingSystem
[05:16:49:154] 008000-01FFFF 44AF878F 44AF878F Same Calibration
[05:16:49:454] 006000-007FFF 9734899C 9734899C Same Parameter
[05:16:49:764] 004000-005FFF 85B5BB36 85B5BB36 Same Parameter
[05:16:50:194] 000000-003FFF 023488D6 023488D6 Same Boot
[05:16:50:264] The contents of the file match the contents of the PCM.
[05:16:50:344] Clearing trouble codes.
[05:16:51:594] Clearing trouble codes.
[05:16:52:714] Elapsed time 00:02:30.3463096

Awesome job mate. I will be certainly watching this thread

Thanks bro, the price will be RIGHT for hobbiest as well as pro's ... right now it's looking like $199.95 US, includes the extruded 2 piece enclosure with wall wart 1a power supply and also base price includes the common p01/p59/p04/e54 diesel etc type blue connector. Then if you need mefi, LT1 obd1 and 2, e38, e39, e40, e67, e78, e92 or whatever, those cables will be as reasonable as I can provide too. I also have "universal" ends so you can make up whatever you want for whatever 'puter. I am pretty excited, it's been a road.

Nice! I will be interested once they are for sale

Dude, that is so awesome, looks real good!

I notice the db9->DLC cable is pretty short, do you have longer ones available ??
Not a big deal, just curious.

In-Tech wrote:[05:11:45:530] PCM Hammer 014

Ummm, bit behind are we ...

Gampy wrote:Dude, that is so awesome, looks real good!

I notice the db9->DLC cable is pretty short, do you have longer ones available ??
Not a big deal, just curious.

In-Tech wrote:[05:11:45:530] PCM Hammer 014

Ummm, bit behind are we ...

Hiya Gampy, and thanks.
They are db15, one is vga(3 row) and the other is standard 2 row db15. I managed to get almost all of the protocols including K line and L line, CAN and of course the junk Ford crap and the FEPS is setup to tell you (via LED) if your device already does the 18v trigger for programming, if not, flip the FEPS switch(circuit protected via a diode) .

I don't like the 6' cables on a bench setup so I kept it shorter is all for now. Custom cables are weird and pricey(that was a friggin project), If I had your kinda money I could do anything

Gampy wrote:

In-Tech wrote:[05:11:45:530] PCM Hammer 014

Ummm, bit behind are we ...

I did get the nag that said I was riding the short bus. I downloaded, I think, v18 but it didn't have a .exe so I left well enough alone. It was plenty early enough this morning that I didn't feel like assembling anything

Gampy wrote:Dude, that is so awesome, looks real good!

Shit yeah gampy! I’m looking forward to this one.
Due to life crap I don’t have a setup anymore,but now looking to setup again. This is coming along at the right time.

Mine is more sophisticated ... It's got built in cross talk and accidental disconnects!
Not to mention proper color coding!