pcmhacking.net

VzFlasher V0.05
- Reads ECU calibration and Full flash
- *Writes SPS Gzipped files calibration and full flash
- *Writes full flash and missing secondary OS files
- *Uses an internal database to check for correct main OS to engine cal and superseded files
- Displays file info from a database lookup
- *Won’t write SPS files if not found in database (Incorrect cal to OS will damage ECU)
- *Have included most modules in folders of their OS
- *Full SPS writes require these folders for looking up missing Secondary OS
- There is a stop button available to abort a process but using it mid write can damage ecu

* Not available in demo version

i dont have a use for it, but it looks good

Update - added 1 module and 3 database entries

I have nothing with an E55 but this looks awesome!!! Thanks for contributing this!!!!!

ironduke wrote:I have nothing with an E55 but this looks awesome!!! Thanks for contributing this!!!!!

Same here, looks great

good stuuf bro.
i just tried to read a calibration off a unit here - that was successful. then i wrote one from you files - that worked. but when i try to write the one i just read back it gives me this error.
my file is attached.

10:03:20.7 - Ecu contains
10:03:20.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:12:39.2 - Reading Calibration 0x001C2000, 0x001DFFFF
10:13:39.1 - Calibration Read Successful
10:13:39.1 - Operation completed successfully
10:14:03.7 - Ecu contains
10:14:03.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:14:03.8 - File contains
10:14:03.8 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:14:05.3 - Writing Calibration 0x001C2000, 0x001DFFFF
10:14:35.2 - Calibration Write Successful
10:15:10.4 - Ecu contains
10:15:10.4 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - Ecu contains
10:16:15.7 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - C:\VZ E55 TOOL\VZ FLASHER\MY FILES\92190931.bin
10:16:15.7 - Incorrect engine calibration file or format

julespatch wrote:good stuuf bro.
i just tried to read a calibration off a unit here - that was successful. then i wrote one from you files - that worked. but when i try to write the one i just read back it gives me this error.
my file is attached.

10:03:20.7 - Ecu contains
10:03:20.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:12:39.2 - Reading Calibration 0x001C2000, 0x001DFFFF
10:13:39.1 - Calibration Read Successful
10:13:39.1 - Operation completed successfully
10:14:03.7 - Ecu contains
10:14:03.7 - 92179470 92190931 2005 MAN Ute LE0 RWD
10:14:03.8 - File contains
10:14:03.8 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:14:05.3 - Writing Calibration 0x001C2000, 0x001DFFFF
10:14:35.2 - Calibration Write Successful
10:15:10.4 - Ecu contains
10:15:10.4 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - Ecu contains
10:16:15.7 - 92179470 92190930 2005 AUTO Ute LE0 RWD
10:16:15.7 - C:\VZ E55 TOOL\VZ FLASHER\MY FILES\92190931.bin
10:16:15.7 - Incorrect engine calibration file or format

Thanks mate
My read files aren't sps format.
So when you click the write calibration button and it ask Write sps calibration file?, Select NO

Update
Added Engine Calibration 92190931.bin

Update
Fixed TesterPresent error in writing full flash

tested today, works great! thanks