Page 1 of 1
8192 coms
Posted: Thu Sep 16, 2021 2:24 pm
by shane1
My Vr ecm idle stepper control has died
. i cannot find a VR/S manual ecu to replace it . i have boxes of 808's can you still get the fast ALDL boards to convert the 808?
Re: 8192 coms
Posted: Thu Sep 16, 2021 2:37 pm
by Gareth
USB comms for 808 are available
viewtopic.php?f=14&t=3613
Re: 8192 coms
Posted: Thu Sep 16, 2021 5:37 pm
by shane1
hey gareth , i tried messaging you , cant do it?? message me if you can
Re: 8192 coms
Posted: Sun Sep 19, 2021 6:43 pm
by vlad01
I am sure he means the SXR board not the USB comms.
Re: 8192 coms
Posted: Mon Sep 20, 2021 9:32 pm
by antus
The USB comms can provide an ALDL output, so can be used in place of the SXR boards. Instead of connecting the RX and TX lines, you'd connect the normally unused pin which is ALDL to the pad on the PCB which runs out to the ALDL pin on the back of the pcm. Its not commonly done, and you'd need to figure something for mounting (perhaps glue it to the main pcb) but it can be done.