pcmhacking.net

I want to diasable the knock retard. Is it a case of reducing the value in "Maximum knock spark retard" to 0 degrees. Why? Well I don't want to be putting in lots of advance only to have the computer pull it back without me knowing it. Which raises the subject of the output from the knockboard. I believe this varies between 0v and 5v. I was going to monitor this during tuning. How do I get an output to monitor.
Or I can keep the retard in, but I will need to know when this is happening so I can do the corrections.

there is a retard value in the data stream to watch, can clearly see it on the graphs. I wouldnt turn it off but if you want to, you change the knock retard minimum cooland temp to 152

yeah i leave it turned on and use it to monitor knock ive never seen any knock shown in mine or the vb turbo even at 14psi definately hasnt held us back from false knock