Page 1 of 1
Copy existing tune to NVRAM?
Posted: Sat Dec 18, 2021 8:57 pm
by PappaYeet
Hello. I currently have a Mace memcal in my VT L67 but I am swapping it out for an NVRAM. Is there a way I can copy the Mace tune to my new NVRAM so I'm starting off with what already works? I don't have a memcal burner so it would have to be via the ALDL cable if anything.
Thanks.
Re: Copy existing tune to NVRAM?
Posted: Sun Dec 19, 2021 8:31 am
by antus
It depends whats on there. Read the bin with the delco ose flash tool and then look to identify what it is. If its an enhanced tune from here, which it reasonably likely is someone may be able to put it on the nvram for you, and if the operating system is an exact match to the nvram you might be able to just write the calibration over aldl.
Re: Copy existing tune to NVRAM?
Posted: Mon Jan 10, 2022 12:12 pm
by delcowizzid
If its an edited stock bin no you can't put it onto an nvram and edit it the code for real-time uploads is not in the stock bin