help ? afr rich when crusing and bucking. tunerpro
help ? afr rich when crusing and bucking. tunerpro
can anybody help, i have started making small changes on my nvram for vs turbo. its a v6...
im still trying to figure out the fuel tables, i have set target afr and im using the pin a5 input for wideband, the small changes ive made are for manual trans, lean cruise and fans. if anyone can help me with pulling some fuel out of normal driving and if thats the reason its bucking arouind
im still trying to figure out the fuel tables, i have set target afr and im using the pin a5 input for wideband, the small changes ive made are for manual trans, lean cruise and fans. if anyone can help me with pulling some fuel out of normal driving and if thats the reason its bucking arouind
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: help ? afr rich when crusing and bucking. tunerpro
Are you using 12P? If so post a log.
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: help ? afr rich when crusing and bucking. tunerpro
A log as above would be beneficial as well as your bin.Commylife wrote:can anybody help, i have started making small changes on my nvram for vs turbo. its a v6...
im still trying to figure out the fuel tables, i have set target afr and im using the pin a5 input for wideband, the small changes ive made are for manual trans, lean cruise and fans. if anyone can help me with pulling some fuel out of normal driving and if thats the reason its bucking arouind
However, What changed did you make to the lean cruise?
- antus
- Site Admin
- Posts: 8257
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help ? afr rich when crusing and bucking. tunerpro
2 bar map? and have you set the flags for it and using 11p or 12p? agree, more info needed. whats changed on the car to support boost, what program (11p or 12p?) computer type and logs and bin would help. Generally speaking you would be updating the VE table for fuel to describe how the engine is breathing, not the target AFRs.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7810
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: help ? afr rich when crusing and bucking. tunerpro
Bucking is normally when it's too lean.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: help ? afr rich when crusing and bucking. tunerpro
thanks for the replies lads wasnt expecting them so fast..
i am using vs-sc-v6 enchanced with standard maff
i have got a wideband and cruising at 60 or 80 is my wideband displays anwhere from 10.8 - 11.2 thats with the spartan wideband
turbo is gt3582 im only running 8 pound as i want to learn some more tuning basics. is it worth just changing ecu and loom and use 11 or 12p ?
i am using vs-sc-v6 enchanced with standard maff
i have got a wideband and cruising at 60 or 80 is my wideband displays anwhere from 10.8 - 11.2 thats with the spartan wideband
turbo is gt3582 im only running 8 pound as i want to learn some more tuning basics. is it worth just changing ecu and loom and use 11 or 12p ?
- antus
- Site Admin
- Posts: 8257
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: help ? afr rich when crusing and bucking. tunerpro
Im sure your going to get answers both ways on that question, but personally I wouldnt change it. The earlier 14.7 gear outputs a couple of set AFRs at power on for you to verify you see the right settings in tunerpro. Is this still on the later kit and can you check that? Once you trust the data, then if you post bins and logs you should be able to get some help.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: help ? afr rich when crusing and bucking. tunerpro
righto where and how do i verify
-
- Posts: 3427
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: help ? afr rich when crusing and bucking. tunerpro
Do you still have the factory narrow band O2 sensors fitted? Does it go into closed loop mode?
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: help ? afr rich when crusing and bucking. tunerpro
I doubt it can go into closed loop with those pig rich figures. Get back to basics and check your fuel pressure before trying to tune it.