pcmhacking.net

Hey all,

I have taken the 12p 'VE by Histogram' spreadsheet by Antus and modified it to suit the 11p in my car,
I capped it at 7600rpm as 8000rpm is all my VE table goes to (and 7000 is about max rpm I will ever use)
I also removed all boosted kpa as I am N/A and less info on screen is easier to work with for me.
Dropped 65kpa range as that isn't used on 11p and was getting in the way.
I've checked calcs and rpm range coverage.
I have a great appreciation for the original work by Antus. Bloody terrific.

Would there be interest in me sharing this? Or is it already somewhere on the site that I have not found.

These spreadsheets definitely speed up the process. So helpful, thanks Antus.

Cheers,
Deuce

Cool, yes please share. You can add it here.

Here you are: Edit: updated as there was an issue around 2200 rpm where it was grabbing data from one cell out on the stretched data and new data one cell out on a mis-calculation from everything 2200 and above.
I think I fixed it now (updated version posted)

Thanks!